In late 2014, Ibis set the enduro world abuzz with its all new HD3, somewhat of a reincarnation of its much loved HD but adapted to modern standards with an extra dose of versatility on 27. 5 inch hoops. After that well received overhaul, Ibis decided to catch its breath and leave the Mojo HD3 Carbon Boost Mountain Bike Frame nearly in its current state for 2016, with one tweak in the addition of a Boost rear axle width for increased stiffness and compatibility with larger tires.The Mojo HD3's 27. 5in specific DW Link suspension platform continues to completely isolate rear wheel movement from pedaling and braking forces expect a plush and linear suspension motion that feels like an even bigger bike, yet pedals on flats and climbs with the attitude of an XC machine. The 66. 6 degree angle of the tapered head tube confuses the issue further, taking advantage of DW Link's solidity and the chassis' stability to hit a steeper angle than most six inch bikes. That means the Mojo HD3 leads into climbs with an aggressive front end that doesn't sell you out when you're dropping in for the descent. The bike's spine is built on stout, 16. 9in chainstays and a low, 13. 5in high bottom bracket, which team with the aforementioned geometry for an uncommonly agile enduro sled that gets up and goes or goes down fast, defying the categorizations that limit so many other bikes.The frame accommodates external or internal cable routing and stealth routing for a dropper post of your choice though Ibis suggests a KS LEV Integra. We commend Ibis for its decision to once again include a threaded bottom bracket on the Mojo, which mercifully dismisses any proprietary press fit systems in favor of a rock solid, dirt simple standard that will last for ages. Dual row angular contact bearings on the drive side of the linkage require zero preload adjustment and dramatically reduce play compared to standard, sealed bearings, further bolstering the bike's lateral solidity and your own sense...